ComAp InteliDrive Lite - 8 Values

InteliDrive Lite, SW version 1.9
ID-FLX-Lite-1.9r1 Reference Guide.pdf, ©ComAp – August 2015
113
8 Values
Values are displayed on the controller screen or are accessible via icon in the LiteEdit PC tool.
See the table with all visible values in LiteEdit.
NOTE:
Some engine values (*) are visible only if the ECU unit is configured.
Groups
Name
Note
Load limit
LoadLimitOut
Engine values
RPM
RPM-BI3
ECU State (*)
ECU FreqSelect (*)
SpeedReq Abs
SpeedReq Rel (*)
Engine Speed
Fuel Rate (*)
CoolantTemp (*)
Intake Temp (*)
Oil Press (*)
Boost Press (*)
Oil Temp (*)
ECU-AIN 8 (*)
ECU-AIN 9 (*)
FuelUsed (*)
DPF1 Soot Load (*)
DPF1 Ash Load (*)
If ECU is not configured, then is
displayed only RPM, RPM-BI3
and SpeedReq Abs
Statistic
Run hrs
Num starts
NextServTime
E-Stop
ShutDown
DayCons
TripCons
Analog CU
Ubat
D+
OilPressure
Engine Temp
Fuel level
AIN4-AIN9
Analog inputs are shown
depends on if they are
configured or not
Binary I/O
BIN
BOUT
RemoteControl
Binary states are displayed and
is possible to use extract menu
button for more details
Date/Time
Time
Date
ID info
Engine state
Timer text
Timer val
SW version
Application
SW branch
PasswordDecode