CDM-840 Remote Router MN-CDM840
Ethernet-based Remote Product Management Revision 3
6–18
• Management Multicast IP – This is the Multicast IP Address assigned to all Vipersat network
units to receive management messages from the VMS. This address must match the
VMS Transmit Multicast Address.
Starting with FW Ver. 1.6.2.X, the Management Multicast ID is configured in
the CTOG-250 and automatically distributed to all CDM-840s that are locked
and receiving the Outbound Carrier from the CTOG-250.
Once the CDM-840 is registered in the Vipersat network, the VMS takes full management
control of the Data Rate, Symbol Rate, Frequency, and ModCod demodulator parameters.
Management System Status
This read-only section provides available information on the VMS’s IP Address, Registration
Status, and Version.
To Next Page
Loading...