Comtec CDM-840 - Appendix E. Bpm (Bridge Point-To-Multipoint) Operation; Functional Overview

E–1
Appendix E. BPM (BRIDGE POINT-
TO-MULTIPOINT) OPERATION
E.1 Functional Overview
The overall intent of the Advanced VSAT BPM (Bridge Point-to-Multipoint) feature is to make
the Advanced VSAT equipment appear as a “Sky Ethernet Switch”.
This allows for a greatly
simplified network deployment.
In BPM Mode, all L2/L3/L4 protocols, such as VLAN, MPLS, IPv6, OSPF, and BGP, flow through
the network as they would through an off-the-shelf Ethernet Switch.
Figure E-1. Advanced VSAT BPM “Sky Ethernet Switch”