CDM-840 Remote Router MN-CDM840
Introduction Revision 3
1–9
1.3.4 On-site Firmware Updates
Chapter 4. UPDATING FIRMWARE
Field update of the operating system firmware is possible through file upload via satellite or the
Ethernet port.
1.3.5 On-site Operational Upgrades
Chapter 5. FAST ACTIVATION PROCEDURE
Field activation of software-based options is possible through Comtech EF Data’s FAST (Fully
Accessible System Topology) Feature upgrade process.
1.3.6 Monitor and Control Interfaces
• Chapter 6. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
• Chapter 7. SERIAL-BASED REMOTE PRODUCT MANAGEMENT
The unit is managed through multiple interfaces providing options for both in-band (over
satellite) and out-of-band monitor and control (M&C).
To Next Page
Loading...