CDM-840 Remote Router MN-CDM840
Ethernet-based Remote Product Management Revision 3
6–48
6.3.3.2.4 Configuration | WAN | Label
Use this page to assign up to four Generic Stream Encapsulation (GSE) WAN labels.
Figure 6-22. Configuration | WAN | Label Page
Receive WAN Labels
Edit the Label 1 through Label 4 text boxes to suit. Each label has a valid range of 1 to 2047.
The assigned Receive WAN Labels must match the WAN Labels assigned on the
CTOG-250 Route Table. Note that the preferred method of operation (as required
for ACM/VCM Operation) is to first configure a unique WAN Label in Entry #1 for
each CDM-840 across the network, and then enable CDRP on the CTOG-250. The
associated Route to WAN Label will be automatically updated and maintained.
Click [Submit] to save.
To Next Page
Loading...