CDM-840 Remote Router MN-CDM840
Ethernet-based Remote Product Management Revision 3
6–37
Click [Submit] to save.
Tx ACM Status (List all 880s)
From left to right:
Amount of time (in seconds) since an LQRM (Link Quality Report Message)
message was received from the associated CDD-880 Multi Receiver Router.
Max Seconds since last LQRM
Maximum amount of time since the last LQRM message was received.
The source IP Address from where the last LQRM message was received.
Es/No value received in the last LQRM message.
Currently selected MODCOD.
Current data rate based on current symbol rate and MODCOD.
Click the List all 880s hyperlink in the section header to display the CDD-880 Multi Receiver
Routers incorporated into the active Advanced VSAT Network. The page will update to display
this information:
From left to right:
The recognized CDD-880 is automatically assigned this internal index number.
The source IP Address of the CDD-880.
Displays the state as Dead, Active, or Recovery.
Es/No value received in the CDD-880’s last LQRM message.
Max Seconds Since last LQRM
Maximum amount of time since the last LQRM message was received from
the CDD-880.
Click the Configuration | WAN | Mod | ACM page tab to resume use of the HTTP Interface.
Tx ACM Events
In addition to the date- and time-stamp assigned for each event, information is presented in this
read-only section as follows (from left to right):
New data rate based on new MODCOD and current symbol rate.
Click [Clear ACM Events] to clear all ACM statistics from the buffer.
To Next Page
Loading...