CDM-840 Remote Router MN-CDM840
Appendix C Revision 3
C–2
2. Once you gather this initial pre-reboot information, you must reboot the CDM-840 to re-
initialize and restore service.
3. Once you collect the pre-reboot Serial Interface text capture file, and after the CDM-840
reboots, Sect. C.4 instructs you to you must retrieve the modem’s onboard data collection
files via Ethernet connection, and transfer these files to your User PC:
• The “cdm840slot0.xml” file, which contains the CDM-840 modem configuration
settings;
• The “log0”, “log1”, and “log2” files, which contain debug information.
• The “demodulator.log” and “modulator.log” files, which contain traffic information.
4. Assuming that your User PC is equipped with the appropriate Internet access and e-mail
capabilities (Internet Explorer, for example), you must e-mail these pre- and post-reboot
files to Comtech EF Data Product Support for evaluation.
To Next Page
Loading...