EasyManua.ls Logo

Comtech EF Data cdm-570a - UTIL: FAST) Cnfg (FAST Configuration); UTIL: FAST) View

Comtech EF Data cdm-570a
682 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CDM-570A/570AL Satellite Modem with Optional Packet Processor
Revision 5
Front Panel Operation 6–69 MN-CDM570A
6.3.7.8.1 (UTIL: FAST) Cnfg (FAST Configuration)
FAST Configuration:
Edit Code Demo Mode
Use the
◄ ► arrow keys to select Edit Code or Demo Mode. Press ENTER.
(UTIL: FAST) FAST Configuration Edit Code
See Chapter 5. FAST ACTIVATION PROCEDURE for further information.
FAST: Edit register 2
00000000000000000000 ENT
(UTIL: FAST) FAST Configuration Demo Mode
FAST Demo Mode: Off On
2592000 seconds remain
Use the
◄ ► arrow keys to select FAST Demo Mode as Off or On. Press ENTER.
Demo Mode allows access to ALL modem FAST options for 2592000 seconds (30 calendar
days). Once you turn Demo Mode On, the available time decrements and the bottom line of
the display shows the number of available seconds remaining for the free Demo Mode. You
may turn Demo Mode Off and On as needed until this time expires.
When the Demo period expires, the following message displays:
FAST Demo Mode: Off On
Demo Period Expired
IF THE DEMO MODE STATE (OFF/ON) IS CHANGED, OR IF DEMO MODE IS
ENABLED AND THE TIMER EXPIRES, THE MODEM FIRMWARE WILL
REBOOT AUTOMATICALLY AFTER 5 SECONDS.
NOTE THAT VALIDATION OF AUTHORIZED FAST OPTIONS OCCURS ON
AUTO-REBOOT; IF AN INVALID CONFIGURATION IS FOUND, THE MODEM
CONFIGURATION WILL RESET TO ITS FAXTORY DEFAULT VALUES.
6.3.7.8.2 (UTIL: FAST) View
View Options: 03 (▲ ▼)
150W BPSU Not Installed
Use the ▲▼arrow keys to view which FAST options are currently installed or available.
The top line displays the Option Number.

Table of Contents

Other manuals for Comtech EF Data cdm-570a

Related product manuals