Comtech EF Data CDM-760 - Page 278

Serial Interface Operation Revision 3
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
8–35
Parameter Type
Controller-to-Target
Instruction Code and
Qualifier
Arguments for
Command or
Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
(see Description of Arguments)
Command Query
Response to
Command
Response to
Query
Configuration Save
CST=
N/A
1 byte, value of 0
thru 9
Command only.
Stores the current modem configuration in Configuration Memory location defined by the one-byte argument (0 to 9).
EXAMPLE: <0/CST=4 (stores the current configuration in location 4)
CST=
CST?
CST*
CST#
N/A
Configuration Load
CLD=
N/A
1 byte, value of 0
thru 9
Command only.
Retrieves a previously stored modem configuration from Configuration Memory location defined by the one-byte
argument (0 to 9).
EXAMPLE: <0/CLD=4 (loads modem configuration from location 4 to be the active configuration)
CLD=
CLD?
CLD*
CLD#
N/A