Appendix G Revision 4
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
G–24
G.5.3.2.1 Configure ACM Operation
To configure ACM operation, use the Configuration | Modem page to carry out the tasks
explained in Sect. C.5.1.
If you edit any field, or change any item selected from a drop-down, make sure to
click the ACM page section’s [Submit] action button before you leave the
Configuration | Modem page. If you go to another page without first clicking the
action button, your changes are not
Figure G-11. Configuration | Modem Page
To Next Page
Loading...
