dallmeier DLS 4 Installation And Configuration

DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
81Dallmeier electronic
Housekeeping - Error This message will be send if the system monitoring
(housekeeping) detects an event of the category „error“.
Events of the category „error“ are:
- The I/O board could not be put into operation.
- The I/O board is ready for operation.
- The display could not be put into operation.
- The display is ready for operation.
- The CPU temperature cannot be determined.
- The CPU temperature can be determined.
- The internal temperature cannot be determined.
- Error during determination of the internal temperature.
- The internal temperature can be determined.
- The external temperature cannot be determined.
- Error during determination of the external temperature.
- The external temperature can be determined.
- The revolution of the front fan cannot be determined.
- Error during determination of the revolution of the front
fan.
- The revolution of the front fan can be determined.
- The front fan does not rotate anymore.
- The front fan rotates again.
- The revolution of the rear fan cannot be determined.
- Error during determination of the revolution of the rear
fan.
- The revolution of the rear fan can be determined.
- The rear fan does not rotate anymore.
- The rear fan rotates again.
- The revolution of the HDD fan cannot be determined.
- Error during determination of the revolution of the HDD
fan.
- The revolution of the HDD fan can be determined.
- The HDD fan does not rotate anymore.
- The HDD fan rotates again.
- The housing screw has been loosened.
- The housing screw has been screwed in.
- The housing cover has been opened.
- The housing cover has been closed.
- Power supply unit 1 failed.
- Power supply unit 1 is operational again.
- Power supply unit 2 failed.
- Power supply unit 2 is operational again.
Housekeeping - Sabotage This message will be send if the system monitoring
(housekeeping) detects an event of the category „Sa-
botage“.
Events of the category „Sabotage“ are:
- The BNC terminal has been removed.
- The BNC terminal is ready for operation.

dallmeier DLS 4 Specifications

General

Brand	dallmeier
Model	DLS 4
Category	Measuring Instruments
Language	English