Datalogic AV500 User Manual

DIAGNOSTICS | XPRESS BUTTONS
PRODUCT REFERENCE GUIDE 253
The AutoLearn procedure is as follows:
1. Place one or more barcode types in the camera view. Hold the Xpress button until
LEARN LED lights.
2. Wait until the LEARN LED stays steady (indicating
the reader has detected the bar-
code.
3. To commit the learned barcode type(s) and exit, press the X-PRESS push button
twice.
4. AutoLearn will timeout 60 seconds after the last barcode type is decoded and no
learned
barcode
type(s) will be committed.
If you do not want to accept the learned barcode, let it go and AV500/AV900 will time
out. The learned barcode will not be committed.
AutoLearn will only add new barcode type(s) to the
configur
ation. The function will not
drop or modify existing barcode type(s) enabled in the configuration. AutoLearn will
only enable a learned barcode type if the barcode type does not already exist in the con-
figuration.

Datalogic AV500 Specifications

General

Brand	Datalogic
Model	AV500
Category	Digital Camera
Language	English