Chapter 12 Network Module AH10PFBM
12-43
Click “Process Data” on the left-side window and the details about the slave configuration pop
out on the right-side window. The corresponding relations among the slave configuration
modules, the Input list and the Output list of master and the mapping parameters of the slave
are listed in the following table.
Module in the Input list
of master
Configured module of slave
Mapping parameter
of slave
4word input 4 Word Out, 4 Word In
2 word input 2 Word Out, 2 Word In
Module in the Output
list of master
Configured module of slave
Mapping parameter
of slave
4 word output 4 Word Out, 4 Word In
2 word output 2 Word Out, 2 Word In
To Next Page
Loading...
