Chapter 14 Remote I/O Communication Module AHRTU-PFBS
14-37
Name Setting Explanation
Mode: T-Type
Mode: E-Type
Mode: -Type
Mode:±150mV
CH0~CH7 Input
average time
0x0A Average times setting for CH0~ CH7 input
Ensure that all I/O module parameters settings are correct. Otherwise, the module will
report the error or the communication error of AHRTU-PFBS-5A occurs.
4. Click “Extensions” on the left-side window and then the following settings are done.
(The settings here are default. For the meaning of each option, please refer to section 10.2
in the SYCON.net help.)
To Next Page
Loading...
