Chapter 14 Remote I/O Communication Module AHRTU-PFBS
14-43
9. Click “Master Settings” on the left-side window to set the master parameters.
(The settings here are default. For the meaning of each item, please refer to the user
manual of AH10PFBM-5A.)
When there is an IW or QW-type module and its offset address does not start at 0 or an
even number, user could tick “2 Byte boundaries” to adjust and make the offset address of
each module start at 0 or an even number for the purpose of easy program control.
To Next Page
Loading...
