Chapter 14 Remote I/O Communication Module AHRTU-PFBS
14-53
14.9.3 Setup of INPUT and OUTPUT Areas that AH PLC CPU
Assigns to Master Module
The INPUT and OUTPUT areas that AH PLC CPU assigns to the master module AH10PFBM-5A
are shown below. (Please refer to section 15.1 in the SYCON.net help for the detailed setting)
14.9.4 Configuration of the Master
1. Open the SYCON.net software for configuration of the master and the User Login dialog
appears as follows. Please select “Administrator” for User Name and do not input anything for
Password since the default password is blank.
For the details on the setting and purpose, please refer to section 7.1 in the SYCON.net help.
To Next Page
Loading...
