Chapter 16 Remote I/O Module AHRTU-ETHN-5A
16-23
Field Description
Rack
It indicates a backplane ID.
When the set rack ID is in IO table but it is inconsistent with the actually
connected rack ID, the background is red.
When the actually connected rack ID can be detected but the rack ID is not
in IO table, the background is yellow.
Power Name Power ID is sent back and can be transformed into a module name.
RTU Name Module ID is sent back and can be transformed into RTU name
RTU FW Version The firmware version for RTU
MS LED Module status indicator on RTU
NS LED Network status indicator on RTU
IO LED IO indicator on RTU
RTU Error Code Error code in RTU
Message
Error message in RTU
Module N Name
The module ID is sent back and can be transformed into a module name.
When it is in IO table but is inconsistent with the actually connected module
ID, the background is red.
Module N Name
When the actually connected module ID can be detected but it is not in IO
table, the background is yellow.
Module Version Firmware version of a module
RUN LED
When a module is in RUN status, the indicator is in green light. When a
module is in STOP state, the indicator is OFF.
ERROR LED
When an error occurs in a module, the indicator blinks in red light.
When a warning occurs in a module, the indicator is in yellow light.
When no error exists in a module, the indicator is OFF.
Error Code Error code of a module
Error Message Error message of a module
Refresh Cycle The default value of the refresh cycle; it is10 with the unit: seconds.
“-“ button
The value of update cycle is decreased by 1 every time when clicking the
button. The min. value of update cycle is 1.
“+“ button
The value of update cycle is increased by 1 every time when clicking the
button. The max. value of update cycle is 60.
• Statistic
The page displays the statistic information about relevant network function. The statistic information
will be recalculated after repower on.
To Next Page
Loading...
