Digi TransPort WR31 - Page 305

Configure network interfaces Configure Advanced interfaces settings: External modems and PPP
Digi TransPort WR Routers User Guide 305
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
ppp n name Free text field Description
ppp n l1iface The layer 1
interface, such as
Async Port, PPTP,
W-WAN
This PPP interface will use
ppp n l1nb Layer 1 Interface
number
Default: 0
This PPP interface will use value
ppp n l2face The lower layer
interface, such as.
LAPB, LAPD, XOT
This PPP interface will use
ppp n l2nb Lower layer
interface number.
Default: 0
ppp n aodinua
ppp n phonenum up to 25 digits Dial out using numbers
ppp n ph2 up to 25 digits Dial out using numbers
ppp n ph3 up to 25 digits Dial out using numbers
ppp n ph4 up to 25 digits Dial out using numbers
ppp n prefix 0-9999999999 Prefix n to the dial out number
ppp n username Valid username Username
ppp n password Valid password Password
ppp n epassword The encrypted
password
None-this parameter is not configurable
ppp n r_addr Default 0.0.0.0 set
automatically
Allow the remote device to assign a local IP
address to this router
ppp n IPaddr Valid IP address
a.b.c.d
Try to negotiate a.b.c.d as the local IP address
for this router
ppp n l_addr Valid IP address
Default 1.2.3.4
Use a.b.c.d as the local IP address for this router
ppp n mask Valid IP address
Default
255.255.255.255
Use mask a.b.c.d for this interface
ppp n DNSserver Valid IP address Primary DNS server