Digi TransPort WR31 - Page 658

Configure system settings General system parameters
Digi TransPort WR Routers User Guide 658
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
cmd n tremto 0-86400 seconds Automatically log user out if idle for h hrs m
mins s seconds
This CLI value is entered in seconds only.
local n access 0-4 Use access level
0=Super
1=High
2=Medium
3=Low
4=None
8=Read only
local n tlocto Free text field Never, h hrs, m mins, s secs
cmd n noremecho 0, 1
0=Off (default)
1=On
Enable Remote command echo
cmd n prebanner Valid filename such as
welcome1.txt
CLI Pre-Login Banner
cmd n postbanner Valid filename such as
welcome2.txt
CLI Post-Login Banner
cmd n cmdnua 0-1023 Allow CLI access from X.25 address
local n transaccess 0-4 With TRANSIP, use access level
0=Super
1=High
2=Medium
3=Low
4=None
8=Read only