DongFeng Huge - Page 61

Adjustment before driving
- 61 -
Preparation before driving
1
A/C sensor
The A/C sensor ① on the instrument panel
helps keep the temperature constant. Do not put
any objects on or around the sensor.
Adjustment of A/C system
AUTO mode
Press the AUTO mode button , and then
press the temperature up/down button to set the
temperature.Then the system automatically
senses the inside temperature, and controls the
recirculation/fresh air mode, airflow distribution
mode and fan speed to increase or reduce the
inside temperature to the set value as soon as
possible.
Manual mode
When the A/C is in the AUTO mode, press the
recirculation/fresh air mode button, air outlet
mode button, button, button and
front windshield defogger button to exit the
AUTO mode and enter the manual
mode.Manually adjust the air outlet mode, air
volume, temperature, recirculation/fresh air,
front/rear windshield defogger/defroster, etc. to
meet the comfort requirements.
Turning on/off A/C system
ON
When the A/C is off, turn it on by pressing the
button, button, button, fan
speed control button, front windshield defogger
button, or air outlet mode selector button.
Press the front windshield defogger button to
enable the A/C to enter the front windshield
defogging mode directly, and press the button
again to turn off the system.
Off
When the A/C system is on, you can turn it off by
pressing the A/C OFF button .
Temperature control
Turn the temperature control knob on the control
panel clockwise or touch the temperature up
button on the MP5 display to increase the
temperature. When the temperature reaches
31°C, continue to turn the temperature control
knob on the control panel clockwise or touch the
temperature up button on the MP5 display
to enter the maximum heating mode. At this
time, “HI” is shown in the temperature display
area. Afterwards, the A/C control does not
respond to the temperature up command. Turn
the temperature control knob on the control
panel counterclockwise or touch the temperature
down button on the MP5 display to reduce
the temperature. When the temperature reaches
17°C, continue to turn the temperature control
knob on the control panel counterclockwise or
touch the temperature down button on the
MP5 display. At this time, “LO” is shown in the
temperature display area. Afterwards, the A/C
control does not respond to the temperature
down command.
In the case that the temperature inside the
vehicle is high and needs to be cooled off, the
A/C will work only when the button is
pressed with the engine running.