236
c HELP Mode Function and Operation Procedures
chap.7
1. Functions
H-14
(1),(2) Total countsHELP mode
2. Operation procedure
Accessing HELP modes
a
See page 213
(1) Master total counter display
(2) Resetting of count of total plates made in user mode
(1) Master total counter display
q
Access HELP mode H-14, and press the PRINT key.
¡When the PRINT key is pressed, the total number of
master is displayed.
HELP-014
Master total
F : 11111111
a
To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
wPress the STOP key.
The HELP mode selection display will reappear.
(2)
Resetting the count of total plates made in user mode
qAccess HELP mode H-14, and press the PRINT key.
¡When the PRINT key is pressed, the total number of
platemaking is displayed.
HELP-014
Master total
F : 11111111
a
To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
ePress the STOP key.
The HELP mode selection display will reappear.
wPress the [=] and CLEAR keys.
The resetting will be memorized.
¡
Do not turn off the power before the "SAVE" display has
disappeared.
IMPORTANT :
¡During memorization:
- SAVE -
Value
Value
To Next Page
Loading...
Need help?
General