243
c HELP Mode Function and Operation Procedures
chap.7
H-21
(1) ADF communication checkHELP mode
1. Functions
(1)
ADF communication check
(1)
ADF communication check
2. Operation procedure
Accessing HELP modes
a
See page 213
qAccess HELP mode H-21, and press the PRINT key.
¡
Perform a communication check between the ADF and the main board.
If an error is indicated, refer to the Troubleshooting Guide for a solution.
Modes H-20 are not used.
a
To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
wPress the STOP key.
The HELP mode selection display will reappear.
To Next Page
Loading...
Need help?
General