248
c HELP Mode Function and Operation Procedures
chap.7
ABCD Item Setting
0***
Sign flag
Rises by the set amount for the
lower 3 digits
1***
Lowers by the set amount for the
lower 3 digits
*000
Set amount
Standard (initial value)
Maximum
*001
*010
*011
*100
*101
*110
*111
rPress the [=] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,"SAVE" will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1)
Photo mode white level setting
¡
Following items are indicated.
1. Photo mode white level ( Scanner)
2. Photo mode white level (ADF)
(1)
Photo mode white level setting
H-26
(1) Adjustment / specification settingHELP mode
¡During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 213
qAccess HELP mode H-26, and press the PRINT key.
HELP-026
Adjustment
1111
1:
1111
2:
eUse the [0] and [1] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a
To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
tPress the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -
Scanner
ADF
1 rank: 0.25%
wPress the and/or key to select item.
To Next Page
Loading...
Need help?
General