249
c HELP Mode Function and Operation Procedures
chap.7
H-27
(1) Adjustment / specification settingHELP mode
1. Functions
(1) Initialization of all HELP mode settings
¡
To Initialize all adjustments and spec settings in HELP mode.
( As to the total counter (H-14 and 19), Only user mode counters
are cleared.)
qAccess HELP mode H-27, and press the PRINT key.
wPress the [=] key. The adjustment and specification
settings of the HELP modes will be initialized. (But for the
total counts (H-14 and H-19), only the user mode values will
be initialized.) While initialization is in progress, "SAVE" will
be displayed.
¡
Do not turn off the power before the "SAVE" display has disappeared.
¡For the values after initialization, see the initialization
values for each mode, and the HELP decals (on the inside
of the front cover).
¡
After initialization, carry out the adjustment and specification
setting operations for the various modes.
Inappropriate settings will results in operational problems.
IMPORTANT :
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 213
¡During memorization:
A B C D
- SAVE -
(1) Initializing all the HELP mode settings
a
To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
ePress the STOP key.
The HELP mode selection display will reappear.
To Next Page
Loading...
Need help?
General