Duplo DUPRINTER DP-430 User Manual

290
c HELP Mode Function and Operation Procedures
chap.7
H-76
(1) Adjustment / specification settingHELP mode
ePress the [=] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,"SAVE" will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) C.(Centigrade) / F.(Fahrenheit) setting
¡Following items are indicated.
A : C. / F. setting
B : (Not used)
C : (Not used)
D : (Not used)
(1) C.(Centigrade) / F.(Fahrenheit) setting
¡During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a See page 213
qAccess HELP mode H-76, and press the PRINT key.
HELP-076
Spec setting
1111
wUse the [0] and [1] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
rPress the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -
Display
0***
1***
*0**
*1**
**0*
**1*
***0
***1
0001
Item
( Not used )
( Not used )
( Not used )
C. / F. setting
Setting
OFF : C.
ON : F.
Factory setting

Duplo DUPRINTER DP-430 Specifications

General

Brand	Duplo
Model	DUPRINTER DP-430
Category	Printer
Language	English