Section 1 — Controls & Basic Functions
ENSONIQ KT Musician’s Manual 7
12. Sequencer/Preset Track Buttons
In Edit Sequence/Preset mode, the {SEQUENCER/PRESET_TRACK} buttons are used to select
eight independent tracks. Each track can have a different sound and a unique set of performance
parameters associated with it. By double-clicking (press two times quickly) a
{SEQUENCER/PRESET_TRACK} button while another is selected, you can layer tracks. When
sequences are linked together to create a song, these same buttons are used to create eight
additional song tracks, for a total of sixteen sequencer tracks. Sequence tracks are always
displayed as Trk 01-08; song tracks are always displayed as Trk 09-16.
13. Replace Track Sound Button
Pressing the {REPLACE_TRACK_SOUND} button lights its LED, and places the KT into Replace
Track Sound mode. This mode allows sounds on the individual tracks of a preset/sequence or
song to be assigned and changed. To replace a sound with its effect, double-click the
{REPLACE_TRACK_SOUND} button (its LED will flash to indicate this special function). For
more details, see Section 8 — Understanding Presets.
14. Transport Controls
The “Transport Controls” are used to start, stop, and continue the sequencer, and to put it into
Record and Overdub modes. For more information, see Section 10 — Understanding the Sequencer.
15. Make Default Preset Button
In Sound mode, the {MAKE_DEFAULT_PRESET} button allows you to copy the current Sound,
with its effect, into an empty preset location. It predefines Track parameter settings for each
Track, creating a “default template.” This “template” serves as a standard starting place for MIDI
Master Keyboard operation.
In Seq/Preset mode, pressing {MAKE_DEFAULT_PRESET} will copy the current Track
parameter settings and allow you to save the copy to any undefined preset memory location.
The Make Default Preset function will always work only in the current Seq/Preset mode bank:
• When the current Seq/Preset mode bank is i:INT, pressing the {MAKE_DEFAULT_PRESET}
button will define a new i:INT preset location (if one is available). If all 70 locations have
been defined, the “SORRY! No free Seq Location” message will be displayed.
• When the current Seq/Preset mode bank is a:CARD or b:CARD, pressing
{MAKE_DEFAULT_PRESET} will define a new preset location in the current CARD bank (if
one is available). If all 70 locations have been defined, the “SORRY! No free Seq Location”
message will be displayed.
• When the current Seq/Preset mode bank is r:ROM, pressing {MAKE_DEFAULT_PRESET}
will change the Seq/Preset mode bank to i:INT, and then will define a new i:INT preset
location (if one is available). If all 70 locations have been defined, the “SORRY! No free Seq
Location” message will be displayed.
Holding down the {MAKE_DEFAULT_PRESET} button and pressing the {PLAY} button will
select r:ROM Song 70 and will start playback of the Demo Song.
To Next Page
Loading...
Need help?
General
