CONFIDENTIAL
SHEET
113
NO.
SHEET
REVISION
E
TITLE
NEXT
114
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
ESC ?
n
[Name] Cancel user-defined characters
[Format] ASCII ESC ?
n
Hex 1B 3F
n
Decimal 27 63
n
[Range] 32 £
n
£ 126
[Description] Cancels user-defined characters.
[Notes] · This command cancels the pattern defined for the character code specified by
n
. After the user-defined characters is canceled, the corresponding pattern for
the internal character is printed.
· This command deletes the pattern defined for the specified code in the font
selected by
ESC !
or
ESC M
.
· If a user-defined character has not been defined for the specified character
code, the printer ignores this command.
· This command deletes the pattern defined for the paper selected by
ESC c 1
.
[Reference]
ESC &
,
ESC %
,
ESC c 1
ESC @
[Name] Initialize printer
[Format] ASCII ESC @
Hex 1B 40
Decimal 27 64
[Description] Clears the data in the print buffer and resets the printer mode to the mode that
was in effect when the power was turned on.
[Notes] · The DIP switch settings are not checked again.
· The data in the receive buffer is not cleared.
· The macro definition is not cleared.
· When this command is executed in slip mode, the printer ejects the slip and
selects the paper roll.
· The non-volatile bit image data is not cleared.
· The data of the user NV memory is not cleared.
To Next Page
Loading...
Need help?
General