Epson TM-H5000II series

CONFIDENTIAL
SHEET
161
NO.
SHEET
REVISION
E
TITLE
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
NEXT
162
GS W n
L
n
H
[Name] Set printing area width
[Format] ASCII GS W
n
L
n
H
Hex 1D 57 n
L
n
H
Decimal 29 87 n
L
n
H
[Range] 0 £ n
L
£ 255
0 £
n
H
£ 255
[Description] Sets the printing area width to the area specified by
n
L
and n
H
.
· The printing area width is set to [(
n
L
+ n
H
´ 256) ´ horizontal motion unit)]
inches.
Printable area
Left margin Printing area width
[Notes] · This command is effective only processed at the beginning of the line.
· In page mode, the printer executes only internal flag operations.
· This command does not affect printing in page mode.
· If the [left margin + printing area width] exceeds the printable area, [printable
area width - left margin) is used.
· The horizontal and vertical motion units are specified by
GS P
. Changing the
horizontal and vertical motion units does not affect the current left margin.
· The horizontal motion unit (
x ) is used for calculating the printing area width.
The calculated result is truncated to the minimum value of the mechanical pitch.