CONFIDENTIAL
SHEET
185
NO.
SHEET
REVISION
E
TITLE
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
NEXT
186
6.5 Kanji Control Commands (only for TM-H5000II
IIII
IIM/TM-H5000II
IIII
IIPM)
FS !
n
[Name] Set print mode(s) for Kanji characters
[Format] ASCII FS !
n
Hex 1C 21
n
Decimal 28 33
n
[Range] 0 £
n
£ 255
[Description] Sets the print mode for Kanji characters, using
n
as follows:
Bit Off/On Hex Decimal Function
0 - - - Undefined.
1 - - - Undefined.
2 Off 00 0 Double-width mode is OFF.
On 04 4 Double-width mode is ON.
3 Off 00 . Double-height mode is OFF.
On 08 8 Double-height mode is ON.
4 - - - Undefined.
5 - - - Undefined.
6 - - - Undefined.
7 Off 00 0 Underline mode is OFF.
On 80 128 Underline mode is ON.
[Notes] · When both double-width and double-height modes are set (including right- and
left-side character spacing), quadruple-size characters are printed.
· The printer can underline all characters (including right- and left-side character
spacing), but cannot underline the space set by
HT
and 90° clockwise-rotated
characters.
· The thickness of the underline is that specified by
FS
-
--
-, regardless of the
character size.
· When some of the characters in a line are double or more height, all the
characters on the line are aligned at the baseline.
· It is possible to emphasize the Kanji character using
FS W
or
GS !
, the setting
of the last received command is effective.
· It is possible to turn under line mode on or off using
FS
-
--
-, and the setting of the
last received command is effective.
[Default]
n
= 0
[Reference]
FS
-
--
-,
FS W
,
GS !
To Next Page
Loading...
Need help?
General