CONFIDENTIAL
SHEET
193
NO.
SHEET
REVISION
E
TITLE
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
NEXT
194
FS W n
[Name] Turn quadruple-size mode on/off for Kanji characters
[Format] ASCII FS W
n
Hex 1C 57
n
Decimal 28 87
n
[Range] 0 £
n
£ 255
[Description] Turns quadruple-size mode on or off for Kanji characters.
· When the LSB of
n
is 0, quadruple-size mode for Kanji characters is turned off.
· When the LSB of
n
is 1, quadruple-size mode for Kanji characters is turned on.
[Notes] · Only the lowest bit of
n
is valid.
· In quadruple-size mode, the printer prints the same size characters as when
double-width and double-height modes are both turned on.
· When quadruple-size mode is turned off using this command, the following
characters are printed in normal size.
· When some of the characters on a line are different in height, all the characters
on the line are aligned at the baseline.
· When characters are enlarged in the horizontal direction, they are enlarged to
the right, based on the left side of the character.
·
FS !
or
GS !
can also select and cancel quadruple-size mode by selecting
double-height and double-width modes, and the setting of the last received
command is effective.
[Default]
n
= 0
[Reference]
FS !
,
GS !
To Next Page
Loading...
Need help?
General