CONFIDENTIAL
SHEET
17
NO.
SHEET
REVISION
E
TITLE
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
NEXT
18
1.3.5 Environmental Conditions
1) Temperature: Operating: 5° to 45°C (41° to 113°F)
Storage: -10° to 50°C (14° to 122°F) (except for paper)
2) Humidity: Operating: 10 to 90% RH
Storage: 10 to 90% RH (except for paper)
Figure 1.3.1 Operating Temperature and Humidity Range
3) Vibration resistance: When Packed: Frequency: 5 to 55 Hz
Acceleration: 2 G
Sweep: 10 minutes (half cycle)
Duration: 1 hour
Directions: x, y, and z
No external or internal damage should be found after the
vibration test, and the unit should operate normally.
4) Impact resistance: When Packed: Package: EPSON standard package
Height: 50 cm (19.69")
Directions: 1 corner, 3 edges, and 6 surfaces
No external or internal damage should be found after the
drop test, and the unit should operate normally.
When unpacked: Height: 5 cm (1.97")
Directions: Lift one edge and release it
(for all 4 edges).
When the printer is not printing, no external or internal damage
should be found after the drop test.
Ambient
temperature
[˚C]
[% RH]
Relative humidity
Operating environment
range
34 ˚C, 90 %
40 ˚C, 65 %
45 ˚C, 50 %
90
80
60
20
40
10
0
0 10 20 30 40 50
To Next Page
Loading...
