Epson TM-H5000II series

CONFIDENTIAL
SHEET
116
NO.
SHEET
REVISION
E
TITLE
NEXT
117
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
ESC E
n
[Name] Turn emphasized mode on/off
[Format] ASCII ESC E
n
Hex 1B 45 n
Decimal 27 69 n
[Range] 0 £ n £ 255
[Description] Turns emphasized mode on or off
When the LSB of
n is 0, emphasized mode is turned off.
When the LSB of
n is 1, emphasized mode is turned on.
[Notes] · Two-pass printing is executed on the slip; therefore, printing speed goes slow.
· Only the least significant bit of
n is enabled.
· This command and
ESC !
turn on and off emphasized mode in the same way.
Be careful when this command is used with
ESC !
.
· Emphasized and double-strike printing appear the same.
[Default]
n = 0
[Reference]
ESC !
ESC F
[Name] Set/cancel slip paper reverse eject
[Format] ASCII ESC F
n
Hex 1B 46 n
Decimal 27 70 n
[Range] 0£ n £ 255
Description] Sets or cancels the slip paper reverse eject
When the LSB of
n is 0, cancels the slip paper reverse eject.
When the LSB of
n is 1, sets the slip paper reverse eject.
[Notes] · Only the least significant bit of
n is enabled.
[Default]
n = 1
[Reference]
FF