CONFIDENTIAL
SHEET
119
NO.
SHEET
REVISION
E
TITLE
NEXT
120
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
ESC K
n
[Name] Print and reverse feed
[Format] ASCII ESC K n
Hex 1B4Bn
Decimal 27 75 n
[Range] 0 £
n
£ 255
[Description] Prints the data in the print buffer and feeds the paper
n
´ vertical motion unit
inches in the reverse direction
[Notes] · This command is ignored when receipt paper is selected as the print sheet by
ESC c 0
.
· Sets the print starting position to the beginning of the line.
· The paper feed amount set by this command does not affect the values set by
ESC 2
or
ESC 3
.
· The horizontal and vertical motion units are specified by
GS P
.
· The
GS P
command can change the vertical (and horizontal) motion units.
However, the value cannot be less than the minimum vertical movement
amount, and it must be in even units of the minimum vertical movement
amount.
· The maximum paper feed amount is 1016 mm (40 inches). Even if a paper
feed amount of more than 1016 mm (40 inches) is set, the printer feeds the
paper only 1016 mm (40 inches).
· This command uses the vertical motion unit (
y
).
· This command is ignored in the page mode.
[Reference]
GS P
To Next Page
Loading...
Need help?
General