Epson TM-H5000II series

CONFIDENTIAL
SHEET
125
NO.
SHEET
REVISION
E
TITLE
NEXT
126
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
ESC U
n
[Name] Turn on/off unidirectional printing mode
[Format] ASCII ESC U
n
Hex 1B 55 n
Decimal 27 85 n
[Range] 0 £ n £ 255
[Description] Turns unidirectional printing mode on or off
When the LSB of
n is 0, turns on unidirectional printing mode.
When the LSB of
n is 1, turns off unidirectional printing mode and turns on
bidirectional printing mode.
[Notes] · Only the least significant bit of
n is enabled.
· When unidirectional printing mode is turned on, the printer prints from left to
right.
· When printing on a slip sheet, to avoid horizontal printing misalignment,
unidirectional printing mode should be used.
· This command affects printing on a slip.
[Default]
n = 0
ESC V
n
[Name] Turn 90° clockwise rotation mode on/off
[Format] ASCII ESC V
n
Hex 1B 56 n
Decimal 27 86 n
[Range] 0 £ n £ 1, 48 £ n £ 49
[Description] Turns 90° clockwise rotation mode on/off
n is used as follows:
n
Function
0, 48
Turns off 90° clockwise rotation mode
1, 49
Turns on 90° clockwise rotation mode
[Notes] · This command affects printing on a receipt paper in standard mode. However,
the setting is always effective.
· When underline mode is turned on, the printer does not underline 90°
clockwise-rotated.
· Double-width and double-height commands in 90° rotation mode enlarge
characters in the opposite directions from double-height and double- width
commands in normal mode.
[Default]
n = 0
[Reference]
ESC !, ESC
-
--
-