Epson TM-H5000II series User Manual

CONFIDENTIAL
SHEET
90
NO.
SHEET
REVISION
E
TITLE
NEXT
91
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
6.4 Control Commands
HT
[Name] Horizontal tab
[Format] ASCII HT
Hex 09
Decimal 9
[Description] Moves the print position to the next horizontal tab position.
[Notes] • This command is ignored unless the next horizontal tab position has been set.
• If the next horizontal tab position exceeds the printing area, the printer sets the
printing position to [Printing area width + 1].
• Horizontal tab positions are set with
ESC D
.
• If this command is received when the printing position is at [printing area width
+ 1], the printer executes print buffer-full printing of the current line and
horizontal tab processing from the beginning of the next line.
• The default setting of the horizontal tab position for the paper roll is font A
(12 ´ 24) every 8th character (9th, 17th, 25th, ... column), and for the slip paper
is font A (9 ´ 9) every 8th character (9th, 17th, 25th, ... column).
[Reference]
ESC D
LF
[Name] Print and line feed
[Format] ASCII LF
Hex 0A
Decimal 10
[Description] Prints the data in the print buffer and feeds one line based on the current line
spacing.
[Note] This command sets the print position to the beginning of the line.
[Reference]
ESC 2
,
ESC 3
, Appendix A.1

Epson TM-H5000II series Specifications

General

Brand	Epson
Model	TM-H5000II series
Category	Printer
Language	English