CONFIDENTIAL
SHEET
170
NO.
SHEET
REVISION
E
TITLE
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
NEXT
171
GS b
n
[Name] Turns smoothing mode on/off
[Format] ASCII GS b
n
Hex 1D 62
n
Decimal 29 98
n
[Range] 0 £
n
£ 255
[Description] Turns smoothing mode on or off.
When the LSB of
n
is 0, smoothing mode is turned off.
When the LSB of
n
is 1, smoothing mode is turned on.
[Notes] · This command affects printing on a paper roll. However, the setting is always
effective.
· Smoothing mode is available for built-in, user-defined characters.
· Even if smoothing mode is turned on, smoothing is not executed when either of
character width or character height is the normal size.
· Only the lowest bit of
n
is valid.
[Default]
n
= 0
[Reference]
ESC !
,
GS !
GS f
n
[Name] Select font for Human Readable Interpretation (HRI) characters
[Format] ASCII GS f
n
Hex 1D 66
n
Decimal 29 102
n
[Range]
n
=
0, 1, 48, 49
[Description] Selects a font for the HRI characters used when printing a bar code.
n
selects a font from the following table:
n
Font
0, 48
Font A (12 ´ 24)
1, 49
Font B (9 ´ 17)
[Notes] · HRI indicates Human Readable Interpretation.
· HRI characters are printed at the position specified by
GS H
.
· The bar code can be printed in the paper roll mode only.
[Default]
n
= 0
[Reference]
GS H
,
GS k
To Next Page
Loading...
