Epson TM-H5000II series

CONFIDENTIAL
SHEET
137
NO.
SHEET
REVISION
E
TITLE
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
NEXT
138
ESC p m t1 t2
[Name] Generate pulse
[Format] ASCII ESC p
m t1 t2
Hex 1B 70 m t1 t2
Decimal 27 112 m t1 t2
[Range] m = 0, 1, 48, 49
0 £
t1 £ 255, 0£ t2 £ 255
[Description] Outputs the pulse specified by
t1 and t2 to connector pin m as follows:
m Connector pin
0, 48 Drawer kick-out connector pin 2.
1, 49 Drawer kick-out connector pin 5.
[Notes] · The pulse ON time is [ t1 ´ 2 ms] and the OFF time is [ t2 ´ 2 ms].
· If
t2 < t1 , the OFF time is [ t1 ´ 2 ms]
[Reference] Section 2.2.3,
Drawer kick-out connector , Appendix J
ESC q
[Name] Release
[Format] ASCII ESC q
Hex 1B 71
Decimal 27 113
[Description] Releases the paper
[Notes] · This command is enabled only when processed at the beginning of a line.
· When the slip paper is selected as the print sheet, the printer waits for the
paper to be removed after executing a release; then the printer selects the
paper roll.
· When the paper roll is selected as the print sheet, the printer moves to the next
operation immediately after executing a release.