Epson TM-H5000II series

CONFIDENTIAL
SHEET
154
NO.
SHEET
REVISION
E
TITLE
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
NEXT
155
GS B n
[Name] Turn white/black reverse printing mode
[Format] ASCII GS B
n
Hex 1D 42 n
Decimal 29 66 n
[Range] 0 £ n £ 255
[Description] Turns on or off white/black reverse printing mode.
· When the LSB of
n i s 0, white/black reverse mode is turned off.
· When the LSB of
n is 1, white/black reverse mode is turned on.
[Notes] · Only the lowest bit of
n is valid.
· In white/black reverse printing mode, print dots and non-print dots are reversed.
(Characters are printed in white on a black background.)
· This command is available for built-in characters and user-defined characters.
· When white/black reverse printing mode is on, it also applied to character
spacing set by
ESC SP
.
· This command does not affect bit image, user-defined bit image, bar code, HRI
characters, and spacing skipped by
HT
,
ESC $
, and
ESC \
.
· This command does not affect the space between lines.
· White/black reverse mode has a higher priority than underline mode. Even if
underline mode is on, it is disabled (but not cancelled) when white/black
reverse mode is selected.
· This command affects printing on a paper roll. However, the setting is always
effective.
[Default]
n = 0