CONFIDENTIAL
SHEET
153
NO.
SHEET
REVISION
E
TITLE
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
NEXT
154
GS :
[Name] Start/end macro definition
[Format] ASCII GS :
Hex 1D 3A
Decimal 29 58
[Description] Starts or ends macro definition.
[Notes] · Macro definition starts when this command is received during normal operation.
Macro definition ends when this command is received during macro definition.
· When
GS ^
is received during macro definition, the printer ends macro
definition and clears the definition.
· Macro is not defined when the power is turned on.
· The defined contents of the macro are not cleared by
ESC
@
. Therefore,
ESC @
can be included in the contents of the macro definition.
· If the printer receives
GS :
again immediately after previously receiving
GS :
the printer remains in the macro undefined state.
· While the macro is defined, normal printing is executed.
· The contents of the macro can be defined up to 2048 bytes. If the macro
definition exceed 2048 bytes, excess data is not stored.
[Reference]
GS ^
To Next Page
Loading...
Need help?
General