Epson TM-H5000II series User Manual

CONFIDENTIAL
22
SHEET
App. 22
NO.
SHEET
REVISION
E
TITLE
NEXT
App. 2
3
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
APPENDIX I: PRINT HEAD CLEANING
Paper dust on the heating elements may lower the print quality. In this case, clean the print
head as follows:
1) Open the printer cover.
2) Clean the thermal elements of the print head using a cotton swab moistened with alcohol
solvent (ethanol, methanol, IPA).
NOTES:
· Do not touch the print head thermal elements.
· Do not scratch the print head.
3) Insert a paper roll and close the print head.
NOTE:
The print head becomes very hot just after printing and is very dangerous. Be sure
to allow the print head to cool down (after printing) before cleaning it. Also, be sure
to turn off the printer power before cleaning the print head.
Radiation plate
Head
Thermal element
Figure I.1 Print Head Thermal Elements
(*) Depending on the paper roll used, paper dust may stick to the platen roller and paper roll
end sensor. To remove the paper dust, clean the platen roller and paper roll end sensor
with a cotton swab moistened with water.

Epson TM-H5000II series Specifications

General

Brand	Epson
Model	TM-H5000II series
Category	Printer
Language	English