CONFIDENTIAL
SHEET
196
NO.
SHEET
REVISION
E
TITLE
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
NEXT
197
FS a 0
n
[Name] Read check paper
[Format] ASCII FS a 0
n
Hex 1C 61 30
n
Decimal 28 97 48
n
[Range] 0 £
n
£ 255
[Description] Selects MICR function and reads MICR characters specified by
n
as follows:
Bit Off/On Hex Decimal Function
0 Readable fonts.
1 See the table below.
2 - - - Undefined
3 - - - Undefined
4 - - - Undefined
5 - - - Undefined
6 - - - Undefined
7 Off 00 0 Not used. Fixed to Off.
Readable Fonts
Hex Decimal Font
00 0 E13B
01 1 CMC7
02 2 Undefined
03 3 Undefined
[Notes] · This command is available only when input at the beginning of the line.
· This command is executed after being buffered in the receive buffer.
Therefore, there may be a time lag between receiving this command and
starting MICR reading.
· When an undefined font is selected, this command is ignored.
· If MICR function is not selected when this command is executed, the MICR
function is selected and the printer enters the personal check waiting status.
When slip paper is selected for printing, the printer ejects the current slip, then
waits for check paper to be loaded.
· The personal check wait time is infinite, based on the
ESC f
t1 t2
setting, and
the printer starts reading [
t2
´ 0.1] second after detecting insertion of a personal
check.
· The printer processes only the real-time commands during the paper wait time.
· This command is ignored in page mode.
To Next Page
Loading...
Need help?
General