CONFIDENTIAL
SHEET
110
NO.
SHEET
REVISION
E
TITLE
NEXT
111
TM-H5000
II
IIII
II
series
Specification
(STANDARD)
ESC -
n
[Name] Turn underline mode on/off
[Format] ASCII ESC
-
n
Hex 1B 2D
n
Decimal 27 45
n
[Range] 0 £
n
£ 2, 48 £
n
£ 50
[Description] Turns underline mode on or off, based on the following values of
n
:
n
Function
0, 48 Turns off underline mode
1, 49 Turns on underline mode (1-dot thick)
2, 50 Turns on underline mode (2-dots thick)
[Notes] · The printer can underline all characters (including right-side character spacing),
but cannot underline the space set by
HT.
· The printer cannot underline 90° clockwise rotated characters and white/black
inverted characters.
· When underline mode id turned off by setting the value of
n
to 0 or 48, the
following data is not underlined, and the underline thickness set before the
mode is turned off does not change. The default underline thickness is 1 dot.
· Changing the character size does not affect the current underline thickness.
· Underline mode can also be turned on or off by using
ESC !
. Note, however,
that the last received command is effective.
· If slip paper is selected, the underline is printed with 1-dot thickness even if
n
is
specified as 2 or 50.
[Default]
n
= 0
[Reference]
ESC !
ESC 2
[Name] Select default line spacing
[Format] ASCII ESC 2
Hex 1B 32
Decimal 27 50
[Description] Selects approximately 4.23 mm {1/6 inches} line spacing.
[Notes] · The line spacing can be set independently in standard mode and in page mode.
· The line spacing is set to paper selected by
ESC c 1
.
[Reference]
ESC 3
,
ESC c 1
To Next Page
Loading...
Need help?
General