“Polling Receive:” on page 162
Regarding Sending Faxes
“User Settings” on page 418
“Quick Operation Button:” on page 158
Sending Faxes Using the Printer
You can send faxes by entering fax numbers for recipients on the control panel.
Note:
❏ When sending a fax in monochrome, you can preview the scanned image on the LCD screen before sending.
❏ You can reserve up to 50 monochrome fax jobs even while the phone line is in use for a voice call, sending another fax, or
receiving a fax. You can check or cancel reserved fax jobs from Job/Status.
1.
Place the originals.
You can send up to 200 pages in one transmission; however depending on the remaining amount of memory,
you may not be able to send faxes even with less than 200 pages.
2.
Select Fax on the home screen.
3.
Specify the recipient.
“Selecting Recipients” on page 144
See the following for information on adding optional faxes to the printer.
“Sending Faxes Using the Printer with Optional Fax Boards” on page 377
4.
Select the Fax Settings tab, and then make settings as necessary.
5.
Tap
x
to send the fax .
Note:
❏ If the fax number is busy or there is some problem, the printer automatically redials aer one minute.
❏ To cancel sending, tap
y
.
❏ It takes longer to send a fax in color because the printer performs scanning and sending simultaneously. While the
printer is sending a fax in color, you cannot use the other features.
Related Information
& “Fax Settings” on page 159
& “Checking Fax Jobs in Progress” on page 174
Selecting Recipients
You can specify recipients on the Recipient tab to send the fax using the following methods.
Faxing (Fax-Capable Printers Only)
>
Sending Faxes Using the Printer
>
Selecting Recipients
144
To Next Page
Loading...
Need help?
General
