Epson WorkForce Enterprise WF-C21000 Series User Manual

The Printer Does Not Work as Expected
The Printer Does Not Turn On or O
Power Does Not Turn On
e following causes can be considered.
The power cord is not plugged in properly to the electrical outlet.
Solutions
Make sure the power cord is securely plugged in.
The P button was not pressed for long enough.
Solutions
Hold down the
P button for a little longer.
Power Does Not Turn O
The P button was not pressed for long enough.
Solutions
Hold down the
P button for a little longer. If you still cannot turn o the printer, unplug the power cord.
To prevent the print head from drying out, turn the printer back on and turn it
o
by pressing the
P
button.
Printer Turns O During Use
The overcurrent protection function was activated.
Solutions
Unplug and plug in the power cord, and then turn the printer back on. If the problem cannot be cleared,
contact Epson support.
Paper Does Not Feed or Eject Correctly
No Paper Feeds
e
following causes can be considered.
Solving Problems > The Printer Does Not Work as Expected > Paper Does Not Feed or Eject Correctly
214

Epson WorkForce Enterprise WF-C21000 Series Specifications

General

Duplex Printing	Yes
Monthly Duty Cycle	Up to 400, 000 pages
Print Technology	PrecisionCore
Print Speed	Up to 100 ISO ppm (black/color)
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scanner Type	Color Flatbed / ADF
Recommended Monthly Page Volume	Up to 100, 000 pages
Supported Paper Sizes	Letter, Legal, A4
Ink Cartridge Configuration	4 individual ink cartridges (Black, Cyan, Magenta, Yellow)