Paper or Staples Get Jammed in the Staple Finisher
Check the error displayed on the control panel and follow the instructions to remove the jammed paper including
any torn pieces or jammed staples. e LCD screen displays an animation that shows you how to remove jammed
paper or staples. Next, select OK to clear the error.
!
Caution:
Never touch the buttons on the control panel while your hand is inside the printer. If the printer starts operating, it
could cause an injury. Be careful not to touch the protruding parts to avoid injury.
c
Important:
Remove the jammed paper carefully. Removing the paper vigorously may cause damage to the printer.
Cannot Staple
Paper edges are not aligned.
You can reduce paper misalignments by enabling Settings > General Settings > Printer Settings > Optimize
Finishing > Staple. Note that printing may take longer.
Menu Options for Printing from a Computer (When Staple Finisher
Installed)
Finishing Tab Windows (When Staple Finisher Installed)
Sort:
Shi
Sort:
Osets each set of copies. You can select this option only when you select Auto Select or Finisher Tray
as the Output Tray setting.
Staple:
Select the staple location.
Punch:
Select the punch hole location. Displayed when the punch unit is installed.
Related Information
& “Finishing Tab” on page 51
Using Optional Items
>
Staple Finisher
>
Menu Options for Printing from a Computer (When Staple Finisher Ins
…
347
To Next Page
Loading...
Need help?
General