!
Caution:
❏ Never touch the buttons on the control panel while your hand is inside the printer. If the printer starts operating,
it could cause an injury. Be careful not to touch the protruding parts to avoid injury.
❏ Never touch the areas that are marked with a caution label inside the booklet nisher. ose areas may be very
hot and high temperature may cause burns.
c
Important:
Remove the jammed paper carefully. Removing the paper vigorously may cause damage to the printer.
Cannot Staple
Paper edges are not aligned.
You can reduce paper misalignments by enabling Settings > General Settings > Printer Settings > Optimize
Finishing > Staple. Note that printing may take longer.
Menu Options for Printing from a Computer (When Booklet Finisher
Installed)
Finishing Tab Windows (When Booklet Finisher Installed)
Sort:
Shi Sort:
Osets each set of copies. You can select this option only when you select Auto Select or Finisher Tray
as the Output Tray setting.
Staple:
Select the staple location.
Using Optional Items
>
Booklet Finisher
>
Menu Options for Printing from a Computer (When Booklet Finisher I
…
367
To Next Page
Loading...
Need help?
General