✓ = Available.
- = Not available.
*1 : You need to make settings for each network.
*2 : You can use the standard or the additional network to send to recipients for each destination.
*3 : Available only on either the standard or the additional network.
Installing an Ethernet Board
!
Caution:
Make sure you turn o the power, unplug the power cord, and check that all wiring has been disconnected. e cord
may be damaged, resulting in electric shock or re.
c
Important:
Electrostatic discharge can damage printer parts. Make sure you discharge static electricity from your body by
touching grounding yourself before installing the ethernet board.
1.
Turn o the printer by pressing the
P
button.
2.
Disconnect all cables such as the power cord and USB cable.
3.
Loosen the two screws and then remove the cover.
Using Optional Items
>
10/100/1000 Base-T,Ethernet
>
Installing an Ethernet Board
381
To Next Page
Loading...
