Erase All Memory
Erases all data on the hard disc. You cannot perform other operations or turn
o
the device during formatting.
❏ High Speed: Erases all data with a dedicated erase command.
❏ Overwrite: Erases all data with a dedicated erase command, and overwrites other data in all areas to erase all
data.
❏ Triple Overwrite: Erases all data with a dedicated erase command, and overwrites other data in all areas three
times to erase all data.
Making Settings for Sequential Deletion
Note:
You can also make settings from the device's control panel.
1.
Access Web
Cong
and select the Device Management > Stored Data.
2.
Select ON for Sequential Deletion from Hard Disk.
3.
Click OK.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 405
Formatting the Internal Hard Disc
1.
Select Settings on the home screen on the printer's control panel.
2.
Select General Settings > System Administration > HDD Erase Settings.
3.
Select Erase All Memory.
4.
Select High Speed, Overwrite, or Triple Overwrite according to the purpose.
5.
Select Ye s on the
conrmation
screen.
Monitoring a Remote Printer
Checking Information for a Remote Printer
You can check the following information of the operating printer from Status by using Web Cong.
❏ Product Status
Check the status, cloud service, product number, MAC address, etc.
❏ Network Status
Check the information of the network connection status, IP address, DNS server, etc.
Administrator Information
>
Managing the Printer
>
Monitoring a Remote Printer
551
To Next Page
Loading...
Need help?
General
