Note:
❏ Check the label on the printer for its voltage.
❏ For European users, see the following Website for details on power consumption.
http://www.epson.eu/energy-consumption
Environmental Specications
Operation Use the printer within the range shown in the following graph.
Temperature: 10 to 35°C (50 to 95°F)
Humidity: 15 to 85% RH (without condensation)
Storage
Temperature after initial ink charging: -14 to 40°C (6.8 to 104°F)
*
Temperature before initial ink charging: -20 to 40°C (-4 to 104°F)
*
Humidity: 5 to 85% RH (without condensation)
* You can store for one month at 40°C (104°F).
Environmental Specications for Ink Cartridges
Storage Temperature
-20 to 40 °C (-4 to 104 °F)
*
Freezing Temperature -14 °C (6.8 °F)
Ink thaws and is usable after approximately 12 hours at 25 °C (77 °F).
* You can store for one month at 40 °C (104 °F).
Installation Location and Space
To ensure safe use, place the printer in a location that meets the following conditions.
❏ A at, stable surface that can support the weight of the printer
❏ Locations that do not block or cover the vents and openings in the printer
❏ Locations where you can load paper and remove paper easily
❏ Locations that meet the conditions in the "Environmental Specications" in this manual
Product Information
>
Product Specications
>
Installation Location and Space
448
To Next Page
Loading...
Need help?
General
