Epson WorkForce Enterprise WF-C21000 Series User Manual

Restore Default Settings
Restore all Wi-Fi Direct (simple AP) settings to their defaults.
e Wi-Fi Direct (simple AP) connection information of the smart device saved to the printer is deleted.
Note:
You can also set up from the Network tab > Wi-Fi Direct on Web Cong for the following settings.
❏ Enabling or disabling Wi-Fi Direct (simple AP)
❏ Changing network name (SSID)
❏ Changing password
❏ Changing the frequency range
Depending on the region, this setting may not be displayed.
❏ Restoring the Wi-Fi Direct (simple AP) settings
Checking the Network Connection Status
You can check the network connection status in the following way.
Related Information
& “Checking the Network Connection Status from the Control Panel” on page 320
& “Printing a Network Connection Report” on page 321
Checking the Network Connection Status from the Control Panel
You can check the network connection status using the network icon or the network information on the printer’s
control panel.
Checking the Network Connection Status using the Network Icon
You can check the network connection status and strength of the radio wave using the network icon on the
printer's home screen.
Related Information
& “Guide to the Network Icon” on page 30
Adding or Replacing the Computer or Devices > Checking the Network Connection Status > Chec …
320

Epson WorkForce Enterprise WF-C21000 Series Specifications

General

Duplex Printing	Yes
Monthly Duty Cycle	Up to 400, 000 pages
Print Technology	PrecisionCore
Print Speed	Up to 100 ISO ppm (black/color)
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scanner Type	Color Flatbed / ADF
Recommended Monthly Page Volume	Up to 100, 000 pages
Supported Paper Sizes	Letter, Legal, A4
Ink Cartridge Configuration	4 individual ink cartridges (Black, Cyan, Magenta, Yellow)